Yanmar engine pictures

Antworten
Benutzeravatar
BalladExchangeDB
Capt'n
Beiträge: 127
Registriert: Freitag 8. Juli 2011, 17:14

Yanmar engine pictures

Beitrag von BalladExchangeDB »

Hi everybody!

I'm reinstalling my Windows on a new hard disk, and finding my pictures in different hiding places. I found the pictures of the Yanmar installation. The engine in the pictures is the 2YM15. The extra 10 cm space on the shaft should make room even for the 3ym20 engine, since the three cylinder is 10 cm longer than the two cylinder engine.
Dateianhänge
Engine-room.jpg
Engine-room.jpg (15.86 KiB) 16419 mal betrachtet
Yanmar-in-cabin.jpg
Yanmar-in-cabin.jpg (50.91 KiB) 16419 mal betrachtet
Yanmar-engine-base-spacers.jpg
Yanmar-engine-base-spacers.jpg (48.38 KiB) 16419 mal betrachtet
Shaft-distance-Yanmar-2-cyl.JPG
Shaft-distance-Yanmar-2-cyl.JPG (15.71 KiB) 16419 mal betrachtet
Benutzeravatar
BalladExchangeDB
Capt'n
Beiträge: 127
Registriert: Freitag 8. Juli 2011, 17:14

Re: Yanmar engine pictures

Beitrag von BalladExchangeDB »

jereku wrote on May 2, '09
Hi everybody!

At generally there might be a very important matter when installing a new engine in Ballad. Older engines were much higher than a new ones. Therefore the height between old exhaust muffler (water level in muffler!!) and exhaust outlet at new engine is less than 300 millimetres. This is a minimal value. There is a risk that water sucks backward toward engine when you shut down a engine. I have photos of my brand new engine ( 3 cyl. 21 hp Nanni 3.21) installation and how the problem might be resolved, but I don't know, that to post images to here. I didn't made engine installation by myself, all work was made by a professinonal company and installation is also accepted by a Nanni diesel.
robertlgothenburg wrote on May 3, '09
Hello,
Regarding engine installation and Jespers measurement for a larger engine Yanmar.
YANMAR enginge 3YM20: I installed this one a year ago and it is perfect, if you want maximum power. 22 hp and 3 cylinders - very quiet, . and a 3 blade folding propeller from Flexifold, Denmark.

I should think this is the most powerful one you can enter into a Ballad engine hold. Some modifications as usual in the mounting bed but not much. A bit higher then the old Volvo Penta MD7.

Pictures available
Recommended!

Robert

Robert Ljunggren, Gothenburg, Sweden
Ballad 1390
Antworten